The AAF-BAL thermogravimetric analysis (TGA) furnace incorporates an integral balance. It can be used for loss on ignition applications where weight change of the sample must be monitored during the heating process.
The AAF-BAL ashing furnace is fitted with an integral balance and can be used for loss on ignition (LOI) applications. Weight change of the sample is monitored during the heating process and this is required, for example, in the determination of organic matter content in materials such as sediment, sludge, soil and waste. Inorganic materials such as cement, lime, calcinated bauxite and refractories can also be tested.
Carbolite Gero 301 single ramp to setpoint & process timer
Protection of the elements from carbon build-up or corrosive atmosphere, using silicon carbide tiles
2 sided heating
Balance runs independently of the furnace control system
Software supplied with the balance could be used to monitor the balance reading via a computer
Maximum capacity of balance is 3 kg with a resolution of 0.01 g (other capacities available)
Advanced version: The balance is linked to a 3508P1 temperature controller and both temperature and weight can be logged against time using iTools software
A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications
过温保护
8 kg balance with a resolution of 0.1 g
内容可能会被修改或更正。
AAF-BAL 11/17
| 最高温度（℃） | 1100 |
| 加热时间(mins) | -- |
| 最高持续工作温度 | 1000 |
| 尺寸: 内部 高 x 宽 x 纵深 (mm) | 215 x 196 x 400 |
| 尺寸: 外部 高 x 宽 x 纵深 (mm) | 705 x 505 x 675 |
| 尺寸: 炉门开启时外部尺寸高 x 宽 x 纵深 (mm) | 990 x 505 x 675 |
| 尺寸: 与烟囱同高(mm) | 990 |
| 体积 (L) | 17 |
| 最大功率 (W) | 7080 |
| 持续功率 (W) | 3500 |
| 热电偶种类 | K |
| 重量 (kg) | 70 |
请注意：
- Holding power is measured at 500°C
- Heat up rate is measured to 100°C below max, using an empty chamber
- Maximum power and heat up times based on a 240V supply
- Dimensions excluding control box (400 x 170 x 500 mm)
内容可能会被修改或更正。